MIS implementation in IBM Essays

MIS implementation in IBM Essays MIS implementation in IBM Paper MIS implementation in IBM Paper During the operation it has been noted that large quantity of liquid propylene getting accumulated in the Knock Out Drum (KOD) (being carried out from butadiene chiller) at full load of the compressor even at the 50% loading of the compressor. Liquid level rapidly builds up in the KOD the compressor got tripped at high level in KOD. To maintain the suction pressure, the pressure control valve got fully opened to put hot vapor in the KOD. Thus the full energy of the compressor is not utilized. To avoid liquid carry over from the chiller, minimum liquid level was maintained in the chiller. Thus most of the Butadiene tube bundles are not immersed in the liquid propylene. So chilling effect on Butadiene was nominal resulted continuous running of the compressor against the 16 hr running 8 hrs recession philosophy. Temperature across the chiller in butadiene was only 3 c against the design of 5 c. The problem could not be solved even after communication with the designer for several times. This section will allow changing the different parameters of the system. For example: one can skip the discount box from invoicing also one can print packaging instruction to laser just by clicking the box behind that option and make it at tick mark position. And after that click on the save option to save the changes made and then the system works accordingly. There are many parameters there which can be used to make the system work at owner requirement and choices. MIS helps us to gather data and retrieve information from it. This information can be helpful in deciding the future decision of the company. It helps manager to evaluate option on hand. With tons of data and information available a manager can predict a future course of a industry. MIS also helps in giving us a cost-benefit analysis of each process of our company. Through MIS we are able to analyze even a small related process.